Delta Cycle

Your source for innovative bike gear

Shopping Cart
Your cart
El Greco Bike Lift Ceiling Hoist
  • Raise and store a bike up and out of the way
  • Easily holds a bicycle, kayak, ladder, etc.
  • Efficient pulley system helps you lift and lower heavier objects
  • Engineered for long durable performance; finished in tough silver powdercoat
  • Includes mounting hardware and full instructions
  • Maximum load 50lbs (23Kgs)
  • Maximum Ceiling Height 14 ft
  • Product Instructions

 

elgrrecokayak_1.jpg

 

Zoom
 
Bookmark and Share
El Greco Ceiling Hoist
Price
$34.99
quantity
 
REVIEWS
Average rating (from 4):


add your review


Spam is a pain, we're sorry we have to do this to you, but please type the word pictured above so we can make sure you are not a spam machine! (If you can't read the word, try clicking here)



 

This product mounted great. I had to use my own screws. The screws that came with the purchased product were cheap and the heads stripped easily. Other than that I am pleased.

Keith M. 5/10/10
I bought 2 of these for my garage and they work great!!!! I bought these after seeing a similar product for about $40.00 and checked Amazon and found these for half the price.They were easy to install but I used my own hex head screws with a large fender washer----just for my peace of mind. The device works like a mini blind, pull the rope to the left and the bike lowers, pull it to the right and it locks. My 100lb wife has no trouble operating the hoist.

Keith M. 4/8/10
I recently purchased and installed the Delta El Greco Ceiling Hoist for my mountain bike. After reading the the reviews of other hoists from Rad and Racor, I chose the Delta because it had the least negative reviews. Most of these negative comments were related to the supplied mounting screws. The screws are typical Asian-made hardware, not the best in the world - but the screws supplied are not defective. With the proper drive tool, they can be easily used. They are Pozidrive screws, they can be driven by a Phillips driver, but it requires care to properly align the driver with the screw drive recess. If the driver is allow to move off center to an angle while apply drive torque, the bit will easily "cam out." To successfully use the supplied screws, a proper screwdriver must be used. Most people, myself included, do not own Pozidrive tools. I used a #3 Phillips bit in a cordless drill/driver and had no trouble with the screws. However, if you're not comfortable with this, or don't have a #3 Phillips driver, then it's easy enough to go to the local hardware store and buy some screws for under a dollar. As to the operation of the hoist after getting it installed, it works great. The bicycle raises fairly evenly (stays level) and the rope catch holds it securely in place once the bike is up. As another reviewer mentioned, it works sort of like a venetian blind type device. It's still wise to also use the supplied rope cleat to tie-off the excess rope as an added safety measure. I love the way this bicycle hoist works and am very happy with it.

Carol S 2/23/10
Easy to install and works well for a bike

P Newkirk 8/27/09